tensile

英 [ˈtensaɪl]

美 [ˈtensl]

adj.  张力的; 拉力的; 抗张的; 可拉长的; 能伸长的; 可延展的

CET6TOEFLGREIELTSTEM8机械

BNC.24180 / COCA.24946

牛津词典

adj.

• 张力的；拉力的；抗张的
  used to describe the extent to which sth can stretch without breaking
  1. the tensile strength of rope
     绳索的抗拉强度
• 可拉长的；能伸长的；可延展的
  that can be drawn out or stretched
  1. tensile cable
     可伸延的电缆

柯林斯词典

• ADJ 可伸展的;可拉长的
  You usetensilewhen you are talking about the amount of stress that materials such as wire, rope, and concrete can take without breaking; a technical term in engineering.
  1. Certain materials can be manufactured with a high tensile strength.
     有些材料可以制造成抗拉强度大的产品。

英英释义

adj

• capable of being shaped or bent or drawn out
  1. ductile copper
  2. malleable metals such as gold
  3. they soaked the leather to made it pliable
  4. pliant molten glass
  5. made of highly tensile steel alloy
  Synonym:ductilemalleablepliableplianttractile
• of or relating to tension
  1. tensile stress
  2. tensile pull

双语例句

• Compared to tear resistance and tensile strength, fracture toughness is more dependent on fiber length.
  断裂韧性对纤维长度的依赖性比撕裂和抗张强度大。
• Can a bending load makes both compressive and tensile stress in a member?
  弯曲载荷可以对一个物件同时产生压缩应力和张应力么？
• The morphology of the tensile fracture shows toughness fracture for the mix microstructure.
  拉伸端口形貌说明这种贝氏体和马氏体混合组织的拉伸断裂为韧性断裂。
• Adding GF increased not only tensile strength and bending modulus but also impact strength of the composite.
  GF的加入不但提高了材料拉伸强度、弯曲性能，而且提高了其冲击强度；
• Tensile testing, fracture analysis, microstructure analysis, hardness test were carried out on the welded joint.
  对焊接接头进行了拉伸强度测试、断口分析、金相组织分析、显微硬度分析。
• Tensile test, impact test have been carried out for the three alloys.
  对三种合金分别进行了拉伸、冲击试验和断口分析。
• The effect of tensile and torsional strains on electronic properties of small diameter armchair SWNT has been discussed.
  分析了拉伸和扭转形变对小直径扶手椅型SWNT的电子性质的影响。
• In this paper, numerical analyses on residual tensile strength of stiffened panels with crack damage are carried out.
  对具有裂纹缺陷的加筋板的剩余强度进行了数值分析。
• The tensile strength and the elongation percentage of the parent metal and the weld zone increased slightly.
  冲击处理使焊缝区和母材区的强度和伸长率均有所增加。
• The anisotropy coefficients of the uniaxial compressive strength and tensile strength of numerical simulation results are0.72 and0.24, respectively.
  数值模拟结果得出单轴抗压强度和抗拉强度的各向异性系数分别为0.72和0.24；