rearward

英 [ˈrɪəwəd]

美 [ˈrɪrwərd]

adj.  后面的; 后部的

COCA.33356

牛津词典

adj.

• 后面的；后部的
  at or near the back of sth
  1. rearward seats
     后面的座位

柯林斯词典

• ADV 向后面；朝后面
  If something moves or facesrearward, it moves or faces backwards.
  1. ...a rearward facing infant carrier...
     后向式婴儿背带
  2. The centre of pressure moves rearward and the aeroplane becomes unbalanced.
     气压中心后移使飞机失去平衡。
  3. Rearwardis also an adjective.
     
  4. ...the rearward window.
     后边的窗户

英英释义

noun

• direction toward the rear
  1. his outfit marched to the rearward of the tank divisions

adj

• directed or moving toward the rear
  1. a rearward glance
  2. a rearward movement
  Synonym:reverse

adv

• at or to or toward the back or rear
  1. he moved back
  2. tripped when he stepped backward
  3. she looked rearward out the window of the car
  Synonym:backbackwardbackwardsrearwards

双语例句

• Remove the starter rearward from the engine, rotating the starter as necessary.
  从发动机向后拆下起动机，必要时转动起动机。
• Move glass carriage to vent position and remove rearward adjustment bolt from adjustment bracket.
  将玻璃搬运车移至通风口位置，并从调节支架上拆卸后调节螺栓。
• The nose unit is twin-wheeled and retracts rearward.
  前鼻下单元双轮并且向后收起。
• The kinematic characteristics of the rearward separate-planting mechanism were theoretically analyzed and its kinetic process was simulated by monitoring the six selected points on the motion trajactory of the tip of seedling.
  通过秧针端点运动轨迹上的6个特定点，对后插式分插机构的运动学特性作了理论分析和计算机模拟，并利用高速摄像对机构运动学分析进行了试验验证。
• CASE REPORT The first case is subcutaneous swelling at right angle of mandible, the second case at the rearward of cervix and fine needle aspiration were performed in them.
  [病例报告]给例1右下颌角处皮下肿物、例2后颈部皮下肿物均做了穿吸细胞学检查。
• The Calculation of Incompressible Laminar Flow Over a Swept Rearward& Facing Step Using The Finite Element Method
  用有限元法计算绕后掠的后台阶的不可压层流流动
• He moved back; tripped when he stepped backward; she looked rearward out the window of the car.
  他向后移动；他在向后走的时候被绊倒了；她向汽车后车窗看去。
• Starting at the forward end of the upper molding, force the molding onto the door panel flange and continue rearward until it is completely seated on the flange.
  从上部嵌条的前末端开始，用力使嵌条到车门饰板上并且继续向后直到它完全固定在凸缘上。
• Do not want the dispute of rearward comment boss.
  不要在背后议论老板的是非。
• The distribution width of pressure and film profile is increased, secondary pressure peak and minimum film thickness shift rearward in the case of considering plastic factor.
  此外塑性变形因素的存在使得接触区的压力和油膜分布宽度增加，第二压力峰和最小膜厚点后移。