deformations

英 [ˌdiːfɔːˈmeɪʃənz]

美 [ˌdifɔrˈmeɪʃənz]

n.  损形; 变形; 畸形; 破相; 变丑; 残废
deformation的复数

柯林斯词典

• V-ERG （使）变形;（使）成畸形;损毁…的外形
  If somethingdeformsa person's body or something else, it causes it to have an unnatural shape. In technical English, you can also say that the second thingdeforms.
  1. Bad rheumatoid arthritis deforms limbs...
     严重的类风湿性关节炎会造成四肢变形。
  2. ...the ability of a metal to deform to a new shape without cracking.
     金属重新塑形而不断裂的能力

双语例句

• A boundary layer theory of shell buckling, which includes the effects of nonlinear prebuckling deformations, large.
  将壳体屈曲的边界层理论推广到复合材料层合剪切圆柱曲板受侧压作用的情况。
• Special attention is given to the effect of reinforcement on delayed deformations and on the stability of the embankments and foundations.
  特别研究了土工织布加固对堤坝下软土的滞后变形和稳定性的影响。
• Deformable bearings that t ransmit seismic loads limited by plastic deformations or restricted slippage of bearing components;
  传递受到塑性变形或支座构件受限滑移限制的地震荷载的可变形支座；
• Stress concentrations due to prestressing or other loads and to restraints or imposed deformations shall be considered.
  应考虑预加应力或其它荷载以及限制或施加变形引起的应力集中。
• Dial gauges, gridding lines and digital camera were used to monitor quantitatively and write down qualitatively the deformations and displacements of the models.
  采用百分表、网格线和数码相机，对模型的变形和位移进行监测和记录。
• Objective The aim of this study is to measure the deformations of crowns and the failure loads of cements.
  目的探讨三种不同黏结剂对固定义齿刚性及黏结层破坏负荷的影响。
• The influence of inclined struts on the elastic properties under axial, bending, and shear deformations as well as the impact of axial deformation of horizontal struts were considered comprehensively.
  综合考虑了胞体中斜支柱的轴向、弯曲和剪切变形以及水平支柱的轴向变形的影响，利用最小势能原理得到了材料的弹性性能与各向异性比及相对密度的关系。
• In this paper, the general phenomenon about subsidence and deformations of surface in subway construction is illustrated.
  阐述了城市地铁施工过程中，地表沉陷与变形的一般现象，探讨了地表沉降指数函数计算公式。
• This paper studied the forming mechanisms of the Qiyang arcuate structure through regional tectonic evolutional setting and characteristics of structural deformations.
  结合区域构造演化背景及构造变形特征，对祁阳弧形构造的形成机制进行研究。
• Then the door deformations in X and Y directions are analyzed with both theoretical and real gaps.
  分别对车门在理论间隙和实测间隙下的Y向变形、X向变形进行分析。